Panasonic KX-TS108W 3

20

Storing Phone Numbers

You can store up to 20 phone numbers in the one-touch auto dial buttons

(10 numbers in UPPER memory locations, 10 numbers in LOWER

memory locations).

Make sure that a call is not put on hold.

To store in an UPPER memory location

It is recommended that you program an emergency number in the

EMERGENCY button.

1Press (PROGRAM).

2Enter a phone number, up to 22 digits.

≥If you enter a wrong number, press

(PROGRAM) and start again from step 1.

3Press one of the one-touch auto dial

buttons.

≥A long beep sounds.

≥The unit will return to the standby mode.

≥If 3 beeps sound, the number entered in step 2 may be over 22 digits.

Press (PROGRAM) to return to the standby mode, and start again from

step 1.

≥If a pause is required for dialing, press (PAUSE) where needed. Pressing

(PAUSE) counts as one digit (p. 24).

≥When using the Dial Lock (p. 27) or Call Restriction feature (p. 28), you cannot

store a phone number in the EMERGENCY button.

Do not press any one-touch auto dial buttons before storing to prevent

misoperation.

One-Touch Dialer

(EMERGENCY)

One-touch auto dial buttons

(PAUSE)

(PROGRAM)

(AUTO/LOWER)

(SP-PHONE/HEADSET) and Indicator

Contents

Main Before Initial Use Accessories Contents Preparation Basic Operation Advanced Operation Useful Information Location of Controls Display Settings Connecting the Handset/Telephone Line Cord After connection, lift the handset to check for a dial tone. Installing the Batteries Connecting a Communication Device Programming Summary Dialing Mode 3 4 Time Adjustment 3 4 5 6 LCD Contrast 1 3 4 Ringer Volume Wall Mounting 1 2 3 Using the speakerphone 1 Making Calls 2 3 4 To redial the last number dialed Making Calls During speakerphone operation To adjust the handset volume (4 levels) or the speaker volume (8 levels) while talking To increase, press VOLUME (^). To decrease, press VOLUME (_). 1 2 3 Storing Phone Numbers 3 4 Speed Dialer To erase a stored number 3 Dialing a Stored Number 1 Storing Phone Numbers 3 To store in an UPPER memory location One-Touch Dialer To store in a LOWER memory location 3 4 To erase a stored number 2 Dialing a Stored Number One-Touch Dialer 1 2 OR From a LOWER memory location: 1 3 Memory card Special Features For Call Waiting Service Users Press (FLASH) if you hear a call-waiting tone while talking. Temporary Tone Dialing (For Rotary or Pulse Service Users) How to Use the PAUSE Button (For Analog PBX Line/Long Distance Service Users) Muting Your Conversation FLASH Button Selecting the ash time 4 PIN Code 3 4 6 7 To cancel the dial lock To set the dial lock 1 2 3 Dial Lock Call Restriction To set the call restriction 3 4 6 7 Optional Headset Optional Headset Making/Answering Calls 1 2 Battery Replacement 1 2 4 3 Troubleshooting Problem Remedy Page Important Safety Instructions SAVE THESE INSTRUCTIONS Page FCC and Other Information Page Index