Avanti BD6000 Castors with Lock Installation Sketch, Installation of CO2 Cylinder Holder

Castors with Lock Installation Sketch

?Remove the 4 castors from one of the boxes inside the unit. Install the two castors with metal bracket at the front designated positions of the cabinet base and the rest two castors at the rear designated positions (Four screw holes pre -supplied).

Metal

Bracket

?In order to release or lock the brake, follow the below guide.

Installation of CO2 Cylinder Holder

?Install the metal holder provided onto the 4 studs located on the exterior back wall. Align the holes in the holder with the studs and push down firmly. (See Figure 1)

Installation of CO2 Cylinder

?Install your fully charged cylinder into the holder stand.

Figure 1

Installation of CO2 Regulator

?Attach the CO2 regulator to the cylinder by turning the regulator nut onto cylinder valve, making sure washer is securely inserted into connecting nut. Tighten snug using an adjustable wrench (not supplied) and assure there are no leaks. (See Figure 2)

Figure 2

12