Panasonic KX-TS108W Display

For assistance, please call: 1-800-211-PANA(7262)

Preparation

Display

: In the standby mode, the display shows the current time.

(Ex. 12:00AM)

: During a conversation, the call duration is displayed.

(Ex. 2 hours, 14 minutes, 30 seconds)

: (FLASH) was pressed.

:(PAUSE) was pressed while storing phone numbers.

:($) was pressed while dialing.

:(#) was pressed while dialing.

:(AUTO/LOWER) was pressed (p. 18, 21).

:(MUTE) was pressed during a conversation (p. 24).

: The unit is in the clock setting mode (p. 12).

: The unit is in the programming mode (p. 10).

: The dial lock mode is set. To cancel the mode, see page 27.

: This display ﬂashes, when the battery power is low. To replace

the batteries, see page 31.

(This display shows all of the possible conﬁgurations.)

Contents

Main Before Initial Use Accessories Contents Preparation Basic Operation Advanced Operation Useful Information Location of Controls Display Settings Connecting the Handset/Telephone Line Cord After connection, lift the handset to check for a dial tone. Installing the Batteries Connecting a Communication Device Programming Summary Dialing Mode 3 4 Time Adjustment 3 4 5 6 LCD Contrast 1 3 4 Ringer Volume Wall Mounting 1 2 3 Using the speakerphone 1 Making Calls 2 3 4 To redial the last number dialed Making Calls During speakerphone operation To adjust the handset volume (4 levels) or the speaker volume (8 levels) while talking To increase, press VOLUME (^). To decrease, press VOLUME (_). 1 2 3 Storing Phone Numbers 3 4 Speed Dialer To erase a stored number 3 Dialing a Stored Number 1 Storing Phone Numbers 3 To store in an UPPER memory location One-Touch Dialer To store in a LOWER memory location 3 4 To erase a stored number 2 Dialing a Stored Number One-Touch Dialer 1 2 OR From a LOWER memory location: 1 3 Memory card Special Features For Call Waiting Service Users Press (FLASH) if you hear a call-waiting tone while talking. Temporary Tone Dialing (For Rotary or Pulse Service Users) How to Use the PAUSE Button (For Analog PBX Line/Long Distance Service Users) Muting Your Conversation FLASH Button Selecting the ash time 4 PIN Code 3 4 6 7 To cancel the dial lock To set the dial lock 1 2 3 Dial Lock Call Restriction To set the call restriction 3 4 6 7 Optional Headset Optional Headset Making/Answering Calls 1 2 Battery Replacement 1 2 4 3 Troubleshooting Problem Remedy Page Important Safety Instructions SAVE THESE INSTRUCTIONS Page FCC and Other Information Page Index