Shooting

Using the viewfinder

This camera utilizes a viewfinder with a miniature LCD, and a 3.45-inch LCD monitor.

Use them according to application and shooting conditions.

•Brightness and hue of images in the viewfinder and the LCD monitor may sometimes differ from those on a TV monitor.

Check final images with a TV monitor.

Less than 0.01% of the pixels in the LCD may not light or remain on all the time. They are not defective, and will have no effect on the images you record.

Screen burn-in may occur in the LCD monitor, however, this is not a defect.

Shooting

Using the viewfinder

1Turn the POWER/MODE switch of the camera <ON> (Page 27 of Vol.1), and check that images appear in the viewfinder.

2Position the screen of the viewfinder where it is easiest to see.

The viewfinder can be raised to about 90° perpendicular to the camera.

3Adjust the diopter adjustment dial so that you can see the characters on the finder screen clearly.

Diopter adjustment dial

Viewfinder

•Do not leave the eyepiece of the viewfinder pointed in the direction of the sun or strong light sources.

Internal components may be damaged or fire may be caused if light is focused through the lens.

When the LCD monitor is open, the viewfinder may not display anything. Close the LCD monitor. (Page 66)

5