[META DATA] screen (AVCHD mode only)
Item | Display |
| Description of settings |
|
|
mode |
|
|
| ||
|
|
|
|
| |
|
|
|
|
|
|
[CARD READ] | <CAMERA> | Loads the metadata recorded on the memory card into the camera. |
|
| |
| (AVCHD | [SLOT1] [SLOT2] [NO] |
|
| |
| mode only) | ••[NO FILE] is displayed when there is no metadata recorded on the memory |
|
| |
|
| card. |
|
|
|
[RECORD] | <CAMERA> | Sets whether to simultaneously record the metadata on a memory card as it is |
|
| |
| (AVCHD | loaded into the camera. |
|
| |
| mode only) | [ON]: | Records simultaneously. |
|
|
|
| [OFF]: | Does not record simultaneously. |
|
|
[USER CLIP | <CAMERA> | Sets [USER CLIP NAME] recording method. |
|
| |
NAME] | (AVCHD | [TYPE1]: | The user clip name is the same as the [CLIP NAME] if no |
|
|
| mode only) |
| metadata is uploaded or if no uploaded data exists. |
|
|
|
| [TYPE2]: | The user clip name is the same as the [CLIP NAME] if no |
|
|
|
|
| combination of data and COUNT value is uploaded, or if no |
|
|
|
|
| uploaded data exists. |
|
|
[META DATA | <CAMERA> | Displays the metadata recorded in the unit. |
|
| |
PROP] | (AVCHD | [YES] [NO] |
|
| |
| mode only) |
|
|
|
|
[CLIP | <CAMERA> | Resets the COUNT value to 1. |
|
| |
| |||||
COUNTER RST] | (AVCHD | [YES] [NO] |
| Menu | |
| mode only) |
|
|
| |
[META INIT | <CAMERA> | Initializes the metadata recorded in the unit. |
| ||
SET] | (AVCHD | All settings, including the [ON]/[OFF] setting for [RECORD] are cleared. |
|
| |
| mode only) | [YES] [NO] |
|
| |
|
| ||||
is the factory default mode.
[OTHER FUNCTIONS] screen
Item | Display |
| Description of settings | ||
mode |
| ||||
|
|
|
|
| |
|
|
|
|
|
|
[IR REMOTE] | <CAMERA> | Sets the operations of the supplied remote control unit. | |||
| <PB> | [ON]: | Accepts commands from the remote control. | ||
|
|
| ••Note that if the same type of remote control is used near the | ||
|
|
| unit, the unit may receive commands from the other remote | ||
|
|
| control during shooting, for example, and suddenly operate in an | ||
|
|
| unexpected manner. | ||
|
| [OFF]: | Does not accept commands from the remote control. | ||
[DV CONTROL] | <CAMERA> | Specifies the control method when a backup device is connected to the <DV | |||
| (DV mode | OUT> terminal for backup recording. | |||
| only) | [OFF]: | Backup device is not controlled. | ||
|
| [EXT]: | Backup device controlled using <START/STOP> button. Note, | ||
|
|
| however, that recording on the camera is not performed. | ||
|
| [BOTH]: | Backup recording performed by the unit and the backup device. | ||
|
| [CHAIN]: | When the recording nears the end, recording on the backup device | ||
|
|
| which is on standby will automatically start. | ||
|
|
|
|
| is the factory default mode. |
93