Standard auto iris control Auto iris control for spotlight Auto iris control for the backlight compensation

29Information display

The following information is displayed depending on the situation.

••Performance of the auto white balance or the auto black balance

••Warning (Page 76)

••The ND filter recommended under the current shooting conditions is displayed.

••The AWB error message ([LOW LIGHT]/ [LEVEL OVER]) (Page 21)

••The functions assigned to the USER buttons while you hold down the <DISP/MODE CHK> button.

30Time stamp display

Displayed when the [TIME STAMP] item on the setup menu [RECORDING SETUP] screen is [ON].

31Audio level meter display (Page 39)

32Auto iris control display

[ STD ]:

[ SPOT ]:

[ BACK ]:

33IRIS METER display

Displays the preceding bar in the bottom right of the LCD monitor/viewfinder.

Center: Indicates the normal light intensity.

Right: Indicates high-light intensity.

Left: Indicates low-light intensity. Green dots on display:

Indicate the compensation amount during AUTO IRIS.

34Iris display Displays F value.

35Shutter speed display Displays the shutter speed.

36Monitor audio level meter

When you press the <AUDIO MON/ADV> button, the sound volume output from the built- in speaker and headphone jack is displayed.

37DV control device status display (DV mode only)

Displays the status of the device connected to the <DV OUT> terminal.

[] (red): Shooting

[

] (red):

Shooting paused

[

]:

Device cannot be controlled or

 

 

cannot be in shooting/shooting

 

 

pause status

[ ]:

 

Device is not connected

38Recording aspect display (DV mode only) Displayed when recording aspect is set to [LETTER BOX].

Displays

75