[NO CARD]
No memory card is inserted.
R[REPAIR CLIP?]
Do you wish to repair clips now?
S[SET DATE AND TIME]
Set the date and time.
T[THE CLIP IS PROTECTED. PLEASE CANCEL PROTECTION.]
The clip is protected. Please release the protection.
[THE RECORDING IS STOPPED (OVER THE LIMITATION)]
Recording will stop. (Continuous recording for 12 hours)
[THE TC MODE IS CHANGED TO "NDF"]
NDF is selected as the TC mode setting.
[THIS BATTERY CANNOT BE USED.]
This battery cannot be used.
[THIS CARD CANNOT RECORD IN VIDEO MODE.]
This memory card cannot be used for video recording.
[THUMBNAIL DATA ERROR IS DETECTED.]
An error has been detected in the thumbnail information.
U[UNABLE TO FORMAT.]
The memory card cannot be formatted.
Error displays
The following messages are displayed when an error has occurred in the camera or the memory card. If the problem is not solved by switching the power off and back on again, either change the memory card in accordance with the instructions displayed, or consult your dealer.
E[ERROR OCCURRED. PLEASE TURN POWER OFF.]
Displayed when an error has occurred on the camera. Turn off the power.
R
[REC WARNING] | Displays | |
Displayed when an error has occurred during | ||
| ||
recording. Start the recording again. If the warning |
| |
appears again, consult your dealer. |
| |
••Switch the power off if the warning continues |
| |
| ||
to appear. |
| |
••Try inserting a different memory card if |
| |
the warning appears again after restarting |
| |
recording. |
|
S
[SYSTEM ERROR TURN POWER OFF] Displayed when an error has occurred in the system. Switch off the power and back on again.
••If this error is displayed when accessing the memory card, such as when deleting a clip, the memory card may be damaged. Please replace it with a new memory card.
••If this error is displayed during repair, please use the AVCCAM Restorer contents repair software. (Page 16)
[WRITE PROTECT]
This memory card is
77