Panasonic MC-CG983 Removing Belt, Agitator Assembly, Turn POWER NOZZLE right side up

Removing Belt

Tabs

Languettes

Pestaña

Agitator Cover

Couvercle de l’agitateur

Cubierta del agitador

➢Disconnect vacuum cleaner from electrical outlet.

➢Check and remove hair, string and lint build-up frequently in the POWER NOZZLE brush and brush support areas.

➢If build-up becomes excessive, disconnect POWER NOZZLE from wand and follow the steps below.

➢Turn POWER NOZZLE over.

➢Unscrew the two (2) POWER NOZZLE cover screws.

➢Turn POWER NOZZLE right side up.

➢Press handle release pedal and lower the swivel.

➢To remove cover, grasp the sides and pull out.

➢Tilt cover forward from back until front snaps free.

➢Depress tabs on rear of agitator cover and rotate forward to release from the POWER NOZZLE base.

➢Lift agitator assembly out .

➢Remove worn belt.

	Base
	Base
Agitator Support	Base
Support de l’agitateur
Soportes del agitador
	- 44 -

Agitator Assembly

Belt Pulley

End Cap

End

Cap

Brush Unit