Replacing Belt
Motor Shaft
Arbre
d’entraînement 
du moteur
Eje del motor
Belt
Courroie
Correa
Agitator
Agitateur
Agitador
Belt |
|
|
Courroie Motor Shaft | Agitator | |
Correa | Arbre | Agitateur |
d’entraînement | Agitador | |
du moteur | ||
| ||
Eje del motor |
|
| Agitator | |
| Agitateur | |
| Agitador | |
| End Cap | |
| Bouchon | |
Nozzle | Tapa del | |
extremo | ||
Tête | Groove | |
d’aspiration | ||
Ouverture | ||
Boquilla | ||
Ranura | ||
|
➢Replace belt whenever a burning rubber smell caused by excessive slippage occurs.
➢Remove lower plate.
➢Remove agitator by carefully lifting out.
➢Remove worn or broken belt.
➢Clean agitator.
➢Loop new belt (Panasonic Type UB8 only) around motor shaft and agitator pulley; see illustration for correct belt routing.
➢Reinstall agitator back into nozzle housing grooves.
➢After reinstalling the agitator, turn it by hand to make sure that belt is not twisted or pinched and that all rotating parts turn freely.
➢Reinstall lower plate.
- 32 -
