Panasonic MC-UG509 manuel dutilisation Replacing Belt

Replacing Belt

Lift Agitator Up

Soulever l’agitateur

Levantar el agitador

➢Replace belt whenever a burning rubber smell caused by excessive belt slippage occurs.

➢Remove lower plate. See: “Removing and Installing Lower Plate”

➢Remove agitator by carefully lifting out.

Motor Shaft

Arbre d’entraînement du moteur

Eje del motor

Agitator Pulley

Poulie de l’agitateur

Polea del agitador

➢Remove worn or broken belt.

➢Clean agitator. See: “Cleaning Agitator”

➢Loop new belt (Panasonic Type UB8 only) around motor shaft and agitator pulley; see illustration for correct belt routing.

1	Groove
	Ouverture
	Ranura
	End Cap
		Bouchon
		Tapa de
		extremo
	2
	3	End Cap
		Bouchon
		Tapa de
		extremo
		Groove
Agitator Clutch Fork		Ouverture
		Ranura
Fourchette d’embrayage
de l’agitateur
Clutch del agitador

➢Reinstall agitator clutch fork into the agitator end cap.

➢Reinstall agitator back into nozzle housing grooves.

➢After reinstalling the agitator, turn it by hand to make sure the belt is not twisted or pinched and that all rotating parts turn freely.

➢Reinstall lower plate. See: “Removing and Installing Lower Plate”

- 30 -