Replacing Belt
Lift |
Agitator Up |
Soulever l’agitateur |
Unidad del agitador |
Motor Shaft |
| |
Arbre d’entraînement | ||
du moteur | Install | |
Eje del motor | ||
New Belt | ||
| ||
| Poser la nouvelle | |
| courroie | |
| Instalación de la correa | |
| End Cap |
Groove | Bouchon |
Tapa del | |
Ouverture | extremo |
Ranura |
|
➢Replace belt whenever a burning rubber smell caused by excessive slippage occurs.
➢Remove lower plate.
➢Remove agitator by carefully lifting out.
➢Remove worn or broken belt.
➢Clean agitator.
➢Loop new belt (Panasonic Type UB8 only) around motor shaft and agitator pulley; see illustration for correct belt routing.
➢Reinstall agitator back into nozzle housing grooves.
➢After reinstalling the agitator, turn it by hand to make sure that belt is not twisted or pinched and that all rotating parts turn freely.
➢Reinstall lower plate.
- 32 -
