Cleaning Agitator
➢Clean agitator after every five uses
and every time the belt is replaced.
➢ Remove lower plate.
➢ Cut off any carpet pile and lint entangled around agitator with a pair of scissors.
➢Remove agitator.
➢Remove any string or debris located on the end caps, washers or agitator shaft.
➢Reinstall agitator and lower plate.
Replacing Agitator
Card |
Carte |
Tarjeta |
➢When the bristles on the agitator are worn so that they do not touch a card held across the lower plate, the agitator should be replaced.
➢Remove lower plate and agitator.
➢Position belt over belt pulley on the new brush unit.
➢Reinstall agitator and lower plate.
Agitator Assembly
Washer
Brush Unit
Washer
End Cap
End Cap
Belt Pulley
- 34 -
