MC-V414 00

3.5.

Power Cord Replacement

3.6. On / Off Switch

3.5.1.

Removal

3.6.1. Removal

1.Remove the seven (7) screws that secure the dust cover and remove the dust cover.

1.Remove the nozzle cover, agitator assembly, belt and nozzle base.

2.Remove the seven (7) screws that secure the dust cover and remove the dust cover.

3.To replace the on-off switch, remove the plastic insert that is mounted over the motor shaft. Lift the motor up and out of the dust compartment. Take care to note the position of the wires so they can be properly tucked when replacing the motor.

4.Remove the screw that secures the switch cover and remove the switch cover. Remove the two (2) wire con- nectors, disconnect the switch lead wires and slide the wires out of the back of the unit.

2.Remove the two (2) wire connectors, disconnect the wires and pull the cord from the back of the unit.

3.5.2.Installation

1.Insert the new cord into the dust container and wrap around the strain relief as shown above.

2.Rewire per the wiring diagram and secure using the two

(2) wire connectors that were removed earlier.

3.Route all wiring according to the wire management draw- ing shown earlier in this manual.

4.Install the dust cover by first ensuring all wiring are routed correctly so that no wires may be pinched during

assembly.

NOTE: For general servicing, it is necessary to eliminate pinch- ing of any wire during reassembly. After servicing any electrical component or electrical enclosure, the unit should be reassem- bled and checked for dielectric breakdown or current leakage.

3.6.2.Installation

1.For installation of a new on-off switch, insert the lead wires through the opening in the back of the dust con- tainer and rewire per the wiring diagram. Secure the wires using the two (2) wire connectors that were removed ear- lier. Snap the new switch into the proper slots in the dust container.

2.Reassemble the switch cover and the screw that secures it. Reassemble the motor by following the installation instructions in the MOTOR REPLACEMENT section. Reassemble the plastic insert.

3.7.Motor Replacement

3.7.1.Removal

1.Remove the seven (7) screws that secure the dust cover and remove the dust cover.

2.Remove the motor protector located inside the dust com- partment by pushing in on the two retaining tabs. Do one side at a time while pushing out on the motor protector from inside the dust compartment.

3.Once the motor protector has been removed it can be dis- assembled for replacement of parts.

12

Page 11 Page 13
Page 12
Image 12
Panasonic MC-V414 00 specifications Power Cord Replacement On / Off Switch, Motor Replacement
Page 11 Page 13

MC-V414 00 specifications

The Panasonic MC-V414 00 is a versatile and efficient vacuum cleaner designed to meet the needs of modern households. Combining powerful suction capabilities with user-friendly features, this model is perfect for tackling a variety of cleaning tasks in both carpets and hard floors.

One of the standout features of the MC-V414 00 is its robust motor which delivers exceptional suction power, allowing it to easily pick up dirt, dust, and debris from various surfaces. This motor efficiency not only enhances cleaning performance but also contributes to the overall durability of the vacuum, ensuring that it remains a reliable cleaning companion for years to come.

The vacuum cleaner is equipped with a comprehensive filtration system that captures not only large particles but also fine dust and allergens. This system includes a HEPA filter that traps particles as small as 0.3 microns, making it an excellent choice for households with allergy sufferers. The filter is also washable, which adds an eco-friendly element to its design while maintaining optimal performance over time.

A notable feature of the MC-V414 00 is its lightweight construction. Weighing in at under 10 pounds, this vacuum is easy to maneuver around furniture and carry up and down stairs, reducing strain during cleaning sessions. The ergonomic handle design enhances user comfort, allowing for extended cleaning periods without fatigue.

In terms of usability, the MC-V414 00 boasts several practical features, including an automatic cord rewinder that makes storage simple and efficient. The vacuum also features an adjustable height setting, making it suitable for various floor types, ensuring a thorough clean on both high-pile carpets and delicate hard surfaces.

Another key characteristic is the variety of attachments that come standard with the vacuum, including a crevice tool and dusting brush. These attachments allow for easy navigation into tight spaces and thorough cleaning of hard-to-reach areas, increasing the overall versatility of the appliance.

In summary, the Panasonic MC-V414 00 is a reliable, powerful, and user-friendly vacuum cleaner that caters to a range of cleaning needs, making it an excellent investment for maintaining a clean and healthy home environment. With its combination of advanced technologies and practical features, it stands out as an ideal choice for everyday cleaning tasks.
Top Page Image Contents