Thermal Protector
➢If a clog prevents the normal flow of air to the motor, the thermal protector turns the motor off automatically to allow the motor to cool in order to prevent possible damage to the vacuum.
➢During this time the headlight remains on.
➢To correct problem, turn off and unplug vacuum, remove clogs, and/or clean/replace filters.
➢Replace full bag if necessary.
➢Wait approximately thirty (30) minutes, plug vacuum in, turn on to see if thermal protector has reset. Thermal protector will not reset if vacuum is not turned off even if vacuum cools down.
Edge Cleaning
➢ Edge cleaning feature enables improved cleaning of carpets near walls and furniture.
Vac Gauge
➢ The vac gauge detects when dust bag needs changing or the vacuum is clogged.
➢ Check dust bag when vac gauge indicates FULL.
➢ If dust bag is full, change bag according to CHANGING DUST BAG section.
➢ If dust bag is not full, check for clogs according to REMOVING CLOGS section.
- 18 -
