Replacing Belt
Groove |
Ouverture |
Ranura |
End Cap |
Bouchon |
Tapa de |
extremo |
➢Reinstall agitator back into nozzle housing grooves.
➢Close rear belt cover and reinstall felt packing.
➢After reinstalling the agitator, turn it by hand to make sure that belt is not twisted or pinched and that all rotating parts turn freely.
➢Reinstall lower plate.
Cleaning Agitator
➢Clean agitator after every five uses and every time the belt is replaced.
➢ Remove lower plate.
➢ Cut off any carpet pile and lint entangled around agitator with a pair of scissors.
➢Remove agitator.
➢Remove any string or debris located on the end caps, washers or agitator shaft.
➢Reinstall agitator and lower plate.
- 30 -
