Replacing Brushes
Card |
Carte |
Tarjeta |
Bride en E Sujetador de E
| Right End Cap |
Agitator Shaft | Bouchon droit |
Arbre d’entraînement | Tapa de extremo |
Eje del agitador | derecho |
➢When the bristles on the agitator are worn so that they do not touch a card held across the lower plate, the brushes should be replaced.
➢Remove lower plate and agitator.
➢Remove the
➢Do not bend agitator shaft or lose E- clip.
➢Pull agitator shaft out of agitator body.
Agitator Pulley | Agitator Holder |
Support de l’agitateur | |
Poulie de la courroie | Soporte del’agitador |
Polea para correa |
|
Push Off
Pousser vers l’extérieur
Empuje hacia fuera
Brush
Brosse
Cepillo
➢Pull, or pry out, agitator holder and agitator pulley.
➢Push each brush out of agitator body as shown.
➢Install new brushes by reversing procedure.
➢Reinstall agitator holder and agitator pulley completely.
➢Reinstall the agitator shaft, end cap and
➢See exploded view for correct assembly of parts.
➢Position belt over agitator pulley on the agitator.
➢Reinstall agitator and lower plate.
- 32 -
