Replacing Brushes
Card |
Carte |
Tarjeta |
| |
| Sujetador |
| de E |
| Bride en E |
| Right End Cap |
Agitator Shaft | Tapa de extremo |
Eje del agitador | derecho |
Arbre d’entraînement | Bouchon droit |
Agitator Holder
Soporte del’agitador
Polea para correa Support de l’agitateur
Poulie de la courroie
Push Off
Empuje hacia
fueraBrush
PousserCepillo
Brosse
➢When the bristles on the agitator are so worn that they do not touch a card held across the lower plate, the brushes should be replaced.
➢Remove lower plate and agitator.
➢Remove the
➢Do not bend agitator shaft or lose E- clip.
➢Pull agitator shaft out of agitator body.
➢Pull, or pry out, agitator holder and belt pulley.
➢Push each brush out of agitator body as shown.
➢Install new brushes by reversing procedure.
➢Reinstall agitator holder and agitator pulley completely.
➢Reinstall the agitator shaft, end cap and
➢See enlarged view for correct assembly of parts (page 38).
➢Position belt over belt pulley on the agitator.
➢Reinstall agitator and lower plate.
- 36 -
