Replacing Headlight Bulb
Flat Screwdriver
Tournevis à lame plate Desarmador plano
Headlight Lens
Lentille de la lampe Lente de la luz
Slots
Fentes
Ranuras
➢Disconnect power cord from electrical outlet. Lower body to lay the vacuum cleaner flat.
➢Pry out light lens at slots by inserting screwdriver into slot, pushing down on the lens and rotating the screwdriver handle toward vacuum cleaner.
➢Remove the light bulb by pulling straight out.
➢To replace the light bulb carefully insert securely into slot. Replace lens cover.
CAUTION
Do not use a bulb rated over 9W (13V). During extended use, heat from the bulb could overheat surrounding plastic parts.
➢Replace lens cover by inserting bottom tab of lens into slot then applying pressure to top tabs.
➢A “popping” sound indicates lens is snapped properly in place.
- 46 -
