- 13 -- 40 -

TO CHECK BRUSHES:

When brushes are worn to the level
of the base support bar,replace the
agitator.

TO REPLACE BRUSH AGITATOR

UNIT

Remove POWER NOZZLE cover,
belt and agitator assembly. (See
REMOVING BELT).
Remove agitator assembly.
Replace agitator assembly.
Replace belt,agitator assembly and
POWER NOZZLE cover screws.
(See REPLACING BELT).
BaseSupport Bars
Barresde support de la base
Barrade soporte de la base
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
WARNING
Brush Servicing
Overload Tools-
POWER Protector Headlight On-Board Cord Length Cord Reel
120V.AC (60Hz) Yes Yes Yes 20 Ft.(6.1 m) Yes
12.0 A
PPrrootteeccttoorrAAllmmaacceenn--
ccoonnttrraaEExxtteennssiióónnaammiieennttoo
VVoollttaajjeessuubbrreeccaarrggaassLLuuzzHHeerrrraammiieennttaassddee ccoorrddóónnddeell ccoorrddóónn
120V.AC (60Hz) Si Si Si 6,1 m (20 pi) Si
12,0 A
Protecteur Dispositif Longueur Rappel
Alimentation de surcharge d’éclairage Accessoires du cordon du cordon
120 V c.a.(60 Hz) Oui Oui Oui 6,1 m (20 pi) Oui
12,0 A
FEATURE CHART

DDiiaaggrraammaa ddee ccaarraacctteerrííssttiiccaass

Tableau des caractéristiques