Panasonic MW-10 Changing the dimmer / Using the timer, „To return to the previous screen

Using the timer

Photos or audio are automatically played at the set time. “Timer 1”, “Timer 2” and “Timer 3” can be set.

•Set the clock beforehand (¼P9)

•To listen to the radio, tune in to channels beforehand.

In the timer setting, set only audio source and volume for audio playback. For Random, Repeat play, etc. make the settings before the timer playback starts.

The following explains the case when setting “Timer 1” as					Only when audio playback is set
an example.
					7. Press [e, r] to select
1.	Press [zTIMER].	Timer Setting Menu				Timer 1 Audio Settings
2.	Press [w, q] to select “Timer	Timer 1 Settings		Timer	“Playback Time” and press	Audio Playback	On
					[w, q] to select the playback	Playback Time	1 hour
	1 Settings” and press [OK].
					time.	Update Source/Volume
			AM12 3 6	9

		Sun				10 minutes/30 minutes/1 hour/			Source: CD
		M
3.	Set the standby setting to
		Timer 1 Settings				2 hours/3 hours/No Limit
	Enable.	Standby		Enable
					8.	Press [e, r] to select
	1. Press [e, r] to select	Day		Unset				Playback Time	1 hour
						“Update Source/Volume” and
	“Standby” and press [OK].	Time		12:00 A				Update Source/Volume
						press [OK].			Source:CD
	2. Press [e, r] to select
									Volume:25
	“Enable This Timer” and
								Confirm
	press [OK].					The sound source and volume are displayed.
4.	Set the day.	Timer 1 Day Settings				• When you do not change, press [w, q] to select
	1. Press [e, r] to select “Day”					“No” and press [OK].
			Sunday
	and press [OK].					• When you change, make the setting using the
			Monday
	2. Press [e, r] to select the		Tuesday			audio selection button or volume button, press
			Wednesday
	day, add the check mark with					[w, q] to select “Yes” and press [OK].
			Thursday
	[w, q] and press [OK].					As a test, the sound source can be played.
5.	Set the time.				9. Press [e, r] to select “Confirm” and press [OK].
	1. Press [e, r] to select “Time”	Start Time	End Time
					10.Press [e, r] to select “Confirm” and press [OK].
	and press [OK].	7 00 AM	8	00 AM
						If the operation time overlaps other timer settings, the
	2. Press [w, q, e, r] to set
						confirmation message appears.
	the start/end time and press
						• If “Yes” is selected, other timers with the overlapped
	[OK].
						time are disabled.
	• You can also use the numbered buttons.
						• If “No” is selected, the original screen is restored with
	e.g.) 9: [0] ˆ [9]
						the contents of timer setting reserved.
	10: [1] ˆ [0]
					11.Press [		RETURN].
6.	Select Audio Playback ON/	Timer 1 Audio Settings				The standard screen is restored.
	OFF.	Audio Playback		On
	1. Press [e, r] to select “Audio	Playback Time		30 minutes
	Playback” and press [OK].	Update Source/Volume
				Source: CD
	2. Press [e, r] to select “Audio
	Playback”, press [w, q] to
	select “On” or “Off”.

Operations

/ Changing the dimmer / Using the timer

„To return to the previous screen

Press [ RETURN].

„To return to the timer setting menu

Press [zTIMER].

„To disable the set timer

Select “Disable This Timer” in step 3 -2 and press [OK].

„To delete the timer setting

Select “Initialize This Timer” in step 3 -2 and press [OK].

When the timer is set

•When the unit is turned on, if the audio playback is “On”, “z” is displayed one minute before the timer start time.

•At the timer start time, the sound is faded in to the set volume and the audio is played back. (z blinks)

Note

•The timer operates at the set time unless you set it to “Disable”.

•The timer less than 10 minutes may not be displayed on the timer setting screen. (When the audio playback is “On”, only “ ” is displayed.)

•When the Setup Menu, etc. is displayed, audio playback with the timer does not start.

•Audio playback with the timer may not start if the audio media selected for “Audio Playback” is the same as the one selected when the timer starts.

–During CD playback, pause or search

–During iPod playback or search

–When the radio frequency being received is the same, and the Auto/Monaural setting is the same

Using the setup menu

RQT9522

19