Connecting antennas and power source
1 
A
2 |
| B |
|
|
| 3 |
|
|
| C |
|
|
| D |
|
|
| I | H |
|
| G | |
| F |
| |
| E |
| |
|
|
|
Back of product
1.Connect the FM indoor antenna.
•Insert firmly to the end.
•Receive broadcast signals (¼P12) after connection and fix the end of the antenna using a tape (A) at the least noisy position.
2.Connect the AM loop antenna.
B Insert into the groove. Insert firmly until it clicks. C Red D White E Black
F Use a
•Receive broadcast signals (¼P12) after connection and place the antenna at the least noisy position.
•Do not use any other AM loop antennas except the supplied one.
3.Connect the AC power supply cord.
G AC adaptor
H AC power supply cord
I To household AC outlet (Connect last.)
When the Demo function (¼P18) is activated When connecting the AC
power supply cord, the unit is automatically turned on and the screen shown at right appears.
When not using the demo function¼, press [e, r] on the remote control to select the setting to disable it, and then press [OK].
¼With the demo function, simple explanations about the unit’s functions are displayed on the display part.
•If it is set to Enable or operation is not performed for more than 2 minutes, the demo function is activated. If the unit is operated, the demo function is canceled and the standard screen appears.
•You can switch the demo function to Enable/Disable by pressing [DISPLAY MODE] on the main unit for approx. 2 seconds while audio is stopped.
Note
•While using this unit, the AC adaptor may become a little hot. This is not a malfunction.
•The included AC power supply cord and AC adaptor are for use with this unit only. Do not use it with other equipment.
•Do not use AC power supply cord and AC adaptor from other equipment with this unit.
To remove the AC power supply cord
Turn the unit off.
After the screen completely turns off, pull out the AC power supply cord.
About speakers
•These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism.
•You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods.
•When the sound is distorted or the sound quality is adjusted, turn down the volume even in the normal use. (Failure to do so may cause the speakers to be damaged.)
•The speaker nets cannot be removed.
RQT9522
8
