Memorizing broadcast stations to listen (Preset Tuning)
Memorizing broadcast stations
Up to 30 FM stations and 15 AM stations can be memorized. 2 methods are available for this.
| You can select either the | ||
| minimum frequency level or any | ||
| frequency level as a memory | ||
| starting position. | ||
| 1. | Press [FM] or [AM]. | |
|
| • To start memorizing from | |
|
| an arbitrary frequency, | |
Auto Memory |
| adjust to the frequency level | |
Memorizing broadcast |
| beforehand. | |
stations automatically, | 2. Press [PROGRAM]. | ||
starting with the | 3. | Press [e, r] to select the | |
frequency memorized |
| “Auto Memory” and press | |
first and memorizing |
| [OK]. | |
the upper stations. | 4. Press [e, r] to select the | ||
|
| “Minimum Frequency” or | |
|
| “Current Frequency” and | |
|
| press [OK]. | |
|
| The Auto memory starts. | |
|
| When it finishes, the unit | |
|
| receives the broadcast station | |
|
| last memorized. | |
|
|
| |
| 1. | Receive the broadcast | |
|
| station to memorize. (¼P12) | |
Registering preset |
| • The monaural setting | |
| (¼right) can be registered | ||
channels |
| ||
| for FM. | ||
Memorizing your |
| ||
2. Press [PROGRAM]. | |||
favorite broadcast | |||
3. | Press [e, r] to select | ||
stations manually | |||
| “Register/Delete Preset” and | ||
|
| ||
|
| press [OK]. |
4.Press [e, r] to select the channel and press [OK].
Listening to the channel memorized beforehand
| 1. | Press [FM] or [AM]. |
| 2. | Press [PLAY MODE] to |
|
| select “Preset Tuning”. |
| 3. | Press [u/t, y/i] to |
|
| select the channel. |
Preset Tuning |
| • You can also select with the |
|
| numbered buttons. |
|
| • Also, you can press |
|
| [SELECT TRACKS], press |
|
| [e, r] to select the channel |
|
| and press [OK]. |
|
|
|
To cancel the memorized broadcast stations
1. Press [PROGRAM].
2. Press [e, r] to select “Register/Delete Preset” and press [OK].
3. Press [e, r] to select the channel to delete and press [DEL].
• The message for deletion appears.
If noise is excessive when receiving FM stereo
signals
1.Press and hold [PLAY MODE] approx. 2 seconds or more to select “Mono”.
Each time you press and hold Auto (Stereo) Mono “Mono” is displayed.
•When the reception frequency is changed with the manual tuning, the setting returns to “Auto (Stereo)”. Normally, set “Auto (Stereo)”.
If noise is excessive when receiving AM
broadcast signals (BP: Beat-proof)
1.Press [PROGRAM].
2.Press [e, r] to select
3.Press [w, q] to select the least noisy setting among “BP1” to “BP4”.
4.Press [ RETURN] to return to the standard screen.
•Keep distance as far as possible among the AM loop antenna, AC adaptor and the main unit.
When radio reception is poor
Use an outdoor antenna if radio reception is poor.
FM outdoor antenna (using a television antenna)
Remove the included FM indoor antenna.
Connect a coaxial cable (commercially available) (A) to the FM antenna terminal (B) of this unit and TV antenna terminal (Type F) (C).
B
A C
If the reception is still poor with the above connection, an FM dedicated antenna (commercially available) or a booster (amplifier, commercially available) may be necessary. Consult your dealer for details.
Operations
Listening to an iPod / Listening to the radio
RQT9522
13