Panasonic NA-F80T1, NA-F90T1 Operations Panel, Off/On, WASH, Spin Rinse, Start/Hold, Soak Reserve

NA-F90T1 80T1_EN

Operations Panel

Fuzzy logic control is used to recommend the proper water level and amount of detergent for the amount of laundry being done.

.indd 9

WATER LEVEL (Water volume display)

•The appropriate WATER LEVEL for the size and type of your own laundry will be displayed

(LINEAR WATER LEVEL) If set as the WATER LEVEL which is not in the display, the nearest WATER LEVEL will be displayed.

• You can adjust the WATER LEVEL according to your desired level.

• The water level varies for models NA-F80T1.

Time display

•When the machine is in operation, the time display shows how much time (in minutes) is left.

•When the programmable timer has been set, this display shows how much time is left until the wash is finished by pressing the [RESERVE] button.

•Timer indication on the panel will show longer time than selected time as it includes water feeding, draining, etc.

OFF/ON

•The power automatically turns off when total operations is finished.

•The power automatically turns off if [START/HOLD] button is not pressed within 10 minutes after turning on the power.

			WASH, SPIN			RINSE		PROGRAM (Course Select)		START/HOLD
			• Press this button, and the		• Press this button, and the pre-				•
								• According to type of laundry		Press this to start.
			pre-set laundry cycle display		set laundry cycle display will			and stain, you can select	•	Press this to stop in
			will turn off allowing you to		turn off allowing you to choose			suitable course yourself.		themiddle of the cycle.
			choose your own laundry		your own laundry setting.
			setting.		• At “REFILL” selection, water
					will besupplied while “RINSE”
					process is in operation.			SOAK
				RESERVE			• Operations course for heavily washed laundry.
							• You can adjust soak time based on the condition of dirt.
			• Press the [RESERVE] button to set how many hours later you
9/17/08		9					• You can choose your soak time from 1, 3, 5, 8 hours.
			would like the wash to be completed. See page 14 for details.
	9:45:02 AM		Caution: If you need to change the [PROGRAM] and [SOAK] settings after the cycle has already started, turn the power off and on it back.