Programming Double or Triple Quantity PAD

D. PROGRAMMING DOUBLE OR TRIPLE QUANTITY PAD

The oven can not be programmed when Program Lock is activated! (see page 11-12)

DO NOT OPEN THE DOOR WHILE PROGRAMMING!

Example: To program 1.5 times of heating time for double quantity into Number/Memory pad “5”

INSTRUCTION

DIGITAL DISPLAY WINDOW

Digital Display Window must be blank.

2		PROG	Press Prog pad.	PROG
			“PROG” will start to blink.
3		5	Press Number/Memory pad “5”.	PROG
		5	The selected pad number will appear and currently programmed	1
			information will be indicated.	1
				HI
4		x 2	Press Double Quantity pad.	PROG
			The currently programmed magnification number will appear.
			Note: 1.6 times is preset at factory.
5	1	5	Press Number/Memory pads “1” and “5” for 1.5 times.
	1	5	The programmed magnification number will appear.	PROG
			If pad 5 is programmed for 3 minutes, the time for the double quantity
			will be 4 minutes and 30 seconds.
			Available range is 0.1-5.0 times.
6		PROG	Press Prog pad.	PROG
			“PROG” will stop blinking.
			This means that you have completed programming.

• Three seconds later, Digital Display Window will go blank.

Note:

•If you want to program your desired magnification number for triple quantity, repeat as above, using Triple

Quantity pad instead of Double Quantity pad.

Example: To program cooking at DEFROST power for 1 minute into Number/Memory pad “5”

INSTRUCTION

DIGITAL DISPLAY WINDOW

Digital Display Window must be blank.

PROG	Press Prog pad until “PROG”, “P” and “L” appear. (more than five	PROG
PROG	seconds)
	seconds)

“PROG”, “P” and “L” will appear.

•The oven is started by pressing the desired Number/Memory pad. There is no need to press Start pad.

•Opening the door cancels the remaining time on the program.

•The oven can not be programmed or run manually until the program lock is released.

- 11 -