How to Operate
C. PROGRAMMING MEMORY PADS
◆Single stage heating
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (see page 11)DO NOT OPEN THE DOOR WHILE PROGRAMMING!Example: To program cooking on DEFROST power for 1 minute into Memory pad “5”PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW | |
1 | Keep the door closed. |
|
|
| ☛ Digital Display Window must be blank or show “0”. |
|
|
2 | Press Program Entry Button. | PROG |
|
| ☛ “PROG” will start to blink. |
|
|
PROG |
|
|
|
3 | Press Memory pad you wish to program. | PROG |
|
5 | ☛ The selected pad number will appear and currently programmed | A |
|
|
| ||
information will be indicated. | 1 |
| |
| STAGE | HI | |
|
| ||
4 | Press Power Level Selector pad four times. | PROG |
|
| ☛ The selected power level will be indicated, “PROG” and 1st Stage | A |
|
POWER |
|
| |
Heating Indicator “1” will start to blink. | 1 |
| |
|
| ||
| STAGE | DEF | |
|
| ||
5 | Set the desired heating time using Timer Dial. | PROG |
|
| ☛ The set heating time will appear. | A |
|
|
|
| |
| Note: up to 15 min. on HI or MED, 60 min. on LOW, DEF or HOLD | 1 |
|
| STAGE | DEF | |
6 | Press Program Entry Button again. | PROG |
|
| ☛ “PROG” and 1st Stage Heating Indicator “1” will stop blinking. | A |
|
|
|
| |
PROG | This means that you have completed programming. | 1 |
|
STAGE | DEF | ||
• Three seconds later, Digital Display Window will go blank.
Note:
• Program the remaining Memory pads as desired by repeating steps
• When you want to select Memory Area B, press Memory Shift pad 
before selecting the desired Memory pad (step 3).
- 10 -