How to Operate
◆2 or 3 stage heatingThis feature allows you to set to begin heating at one power level then shift automatically to a different power
level after designated amount of heating time.
Example: To cook food at HIGH power for 2 minutes and at DEFROST power for 1 minute
| PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW | ||||
|
|
| Follow steps 1 to 3 on page 7. |
|
|
|
|
|
|
|
| 1 |
|
|
|
|
|
|
| STAGE | HI |
|
|
|
|
|
|
|
|
|
|
4 |
|
| Press Power Level Selector pad four times. |
|
|
|
|
|
|
| ☛ The selected power level will be indicated and 2nd Stage Heating |
|
|
|
|
| POWER |
|
|
|
| ||
| Indicator “2” will start to blink. | STAGE |
| DEF | |||
|
|
|
| 12 |
|
|
|
|
|
|
|
|
|
|
|
5 |
|
| Set the desired heating time for the second stage using the Timer Dial. |
|
|
|
|
|
|
| ☛ The set heating time will appear. |
|
|
|
|
|
|
| Note: up to 15 min. on HI or MED, 60 min. on LOW, DEF or HOLD | STAGE |
| DEF | |
|
|
|
| 12 |
|
|
|
|
|
|
|
|
|
|
|
6 |
|
| Press Start pad. |
|
|
|
|
| START | ☛ The oven lamp will turn on. The total time for both stages will appear |
|
|
|
| |
| and start to count down. 1st Stage Heating Indicator “1” and Power |
|
|
|
| ||
|
|
| 12 |
|
|
| |
|
|
| Level Indicator for the first stage heating will start to blink. | STAGE | HI | DEF | |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
• After the first stage heating, a single beep tone will sound. 2nd Heating Stage Indicator |
|
|
|
| |||
| “2” and Power Level Indicator for the second stage heating will start to blink and the | 2 |
|
|
| ||
| remaining heating time will count down. |
|
|
| |||
| STAGE |
| DEF | ||||
• When all time expires, beep tone will sound and heating will stop. The oven lamp will |
|
|
|
| |||
|
|
|
| ||||
|
|
|
| ||||
| turn off. “0” will blink until the door is opened. One minute later, cooling fan will stop. |
|
|
|
| ||
|
|
|
|
| |||
• Open the door and take the food out. The oven lamp will turn on. Digital Display Window |
|
|
|
| |||
| will show the originally set time and power. (“REPEAT” feature) |
|
|
|
| ||
• | Close the door. The oven lamp will turn off. One minute later, Digital Display Window will | 12 |
|
|
| ||
| go blank. |
|
|
|
| ||
|
| STAGE HI | DEF | ||||
|
|
|
|
|
|
|
|
Note: For 3 stage Heating, repeat steps 4 and 5 above before pressing Start pad.
SPECIAL NOTE: For both single and 2 or 3 stage heating1.While heating, pressing Stop/Clear Time pad stops the operation. You can restart it by pressing Start pad. Pressing Stop/Clear Time pad again will cancel the selected program.
2.While not heating, pressing Stop/Clear Time pad cancels the selected program.
3.You can repeat exactly the same manually selected heating time by pressing only Start pad, if you use the oven again within one minute (within 30 minutes when the door has been left open).
4.One minute later of
- 8 -