Panasonic NE-2180, NE-3280 G. CYCLE COUNTER, ◆To Read Total Cumulative Times That The Oven Has Been Used:, PAD, CODE, CAUSE, Note:, WHAT TO DO, INSTRUCTION, Close the door

How to Operate

G. CYCLE COUNTER

◆To Read Total Cumulative Times That The Oven Has Been Used:

	PAD	INSTRUCTION	DIGITAL DISPLAY WINDOW
1		Open the door and leave it open.

☛ The oven lamp will turn on and “0” will appear.

2			Close the door.
			☛ Carry out Step 3 within 60 seconds of closing the door, or the display
			will go blank.
3		+	While pressing Beep Control Button, press Program Entry Button.
			☛ The display shows the total cumulative number of times the oven has
	BEEP	PROG	been used.

Self Diagnostics Failure Code Explanation

This oven monitors its operation and displays a Failure Code in the display window when a problem occurs.

What to do when a failure code appears:

CODE		CAUSE		WHAT TO DO
F01	• Overcooked food.		• Unplug the appliance to stop beeping.
	• Temperature of exhaust air too high.		• Wait for appliance to cool down to reset operation.
			• If food ignites, do not open the door.
			• If normal operation does not resume, call the service
			agent with information of failure code.
F03	• Incoming line voltage too high.		• Check line voltage and that voltage adjustment is
			matched.
			(Refer to page 5 for power source voltage
			adjustment.)
		This oven is designed to operate
			Line Volt.	Connetor Color
		with 208 or 220-240 Volts AC.
			208 V	White
			220-240 V	Black
F04	• Incoming voltage too low.		• If the line voltage is other than 208 or 220-240 V,
			consult electrician to check outlet.
F05	• Defective Memory IC.		• Unplug the appliance and wait more than 1 minute
			and reconnect.
F33-34	• Defective thermistor circuit.
			• If normal operation does not resume, call the service
F44	• Defective control panel.
			agent with information of failure code.
F81-F84	• Defective relay circuit.
F86-F89

Note: Above codes shown in the display do not indicate all the possible failures on the unit.

- 13 -