How to Operate
E. BEEP TONE
The loudness of beep tone and its duration at the end of heating cycle can be set.
There are four levels of the loudness and two levels of duration.
The loudest level and 3 beeps are preset at the factory.
◆To select loudness level and length “3 beeps”:
| PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
1 |
| Press Program Entry Button. | PROG |
☛“PROG” sign will start to blink in the display window. (The door may be
| PROG | open or closed at this stage.) |
|
|
|
2 |
| Press Beep Control Button. |
| PROG | |
|
| ☛ The tone will sound at its loudest level (level “3”) and the word “bEEP” |
| ||
| BEEP | will appear. “PROG” will start to blink and 1st Stage Heating Indicator | 1 |
| |
|
| “1” (the length of beep tone “3 beeps”) will be indicated. |
|
|
|
|
| Note: Repeating to press Beep Control Button will lower the loudness |
|
|
|
|
| level all the way to silent. (3bEEP |
|
|
|
|
| 1bEEP |
|
|
|
3 |
| Press Program Entry Button again. |
| PROG | |
|
|
|
| ||
|
| ☛ “PROG” will stop blinking. That means that you have completed | 1 |
| |
| PROG | program. |
| ||
|
|
|
| ||
|
| Three seconds later, the display window will go blank when the door is |
|
|
|
|
| closed. |
|
|
|
|
|
|
|
|
|
◆To select length of tone “long beeps for 60 seconds”:
| PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW | |
3 |
| Follow steps 1 to 3 of above. | PROG | |
a |
|
| 1 |
|
|
|
|
| |
|
|
|
|
|
4 |
| Within three seconds after pressing Program Entry Button, press |
|
|
| PROG | |||
|
| Beep Control Button. | 2 |
|
|
| ☛ “PROG” will start to blink and 2nd Stage Heating Indicator “2” (the |
| |
| BEEP |
|
| |
| length of beep tone “long beeps for 60 seconds”) will be indicated. |
|
| |
|
|
|
| |
5 |
| Press Program Entry Button again. | PROG | |
|
| ☛ “PROG” will stop blinking.This means that you have completed programming. | 2 |
|
|
| Three seconds later, the display window will go blank when the door is |
| |
| PROG |
|
| |
|
| closed. |
|
|
|
|
|
|
|
F. PROGRAM LIST
| PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
1 |
| Open the door and leave it open. |
|
|
| ☛ The oven lamp will turn on and “0” will appear. |
|
|
|
|
|
2 |
| While pressing Stop/Clear Time pad, press Start pad. | PROG |
| STOP | ☛ All currently programmed information (the program set into each | A |
| 1 | ||
|
| Memory pad (A/B sides), Beep Tone, and Program Lock information) | |
| CLEAR TIME | STAGE HI | |
| + | will continuously appear. | PROG |
|
| B | |
|
|
| 1 |
|
|
| STAGE HI |
| START |
|
|
|
|
| 2 |
|
|
|
|
- 12 -