How to Operate

◆2 or 3 stage heating

THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (see below on this page)

DO NOT OPEN THE DOOR WHILE PROGRAMMING!

Example:To program cooking at DEFROST power for 1 minute and at HIGH power for 2 minutes into Memory pad “5”

PAD

INSTRUCTION

DIGITAL DISPLAY WINDOW

 

Follow steps 1 to 5 on page 10.

PROG

 

 

 

A

 

 

 

1

 

 

 

STAGE

DEF

6

Press Power Level Selector pad once.

PROG

 

POWER

☛ The power level for 2nd stage will be indicated, 2nd Stage Heating

A

 

STAGE

HI

 

Indicator “2” will start to blink.

 

 

12

 

7

Set the desired heating time using Timer Dial.

PROG

 

 

☛ The set heating time will appear.

A

 

 

 

 

 

Note: up to 15 min. on HI or MED, 60 min. on LOW, DEF or HOLD

STAGE

HI

 

 

12

 

8

Press Program Entry Button again.

PROG

 

 

☛ “PROG” and 2nd Stage Heating Indicator “2” will stop blinking. The

A

 

PROG

total time for both stages will appear. This means that you have

12

 

completed programming.

STAGE

HI

 

 

 

• Three seconds later, Digital Display Window will go blank.

D. PROGRAM LOCK

◆To activate Program Lock:

 

PAD

INSTRUCTION

DIGITAL DISPLAY WINDOW

1

 

Keep the door closed.

 

 

 

☛ Digital Display Window must be blank.

 

 

 

 

 

2

 

Press Program Lock Button for five seconds until “PROG”, “P” and

PROG

 

 

“L” appear.

 

 

PROG LOCK

☛ “PROG”, “P” and “L” will appear.

 

 

 

 

 

In Program Lock mode:

• The oven is started by pressing the desired Memory pad. There is no need to press Start pad.

•Opening the door cancels the remaining time on the program.

•The oven can not be programmed until the program lock is released.

◆To release Program Lock:

 

PAD

INSTRUCTION

DIGITAL DISPLAY WINDOW

1

 

Keep the door closed.

 

 

 

☛ Digital Display Window must be blank.

 

 

 

 

 

2

 

Press Program Lock Button for five seconds until “PROG” and “P”

PROG

 

 

appear.

 

 

PROG LOCK

☛ “PROG” and “P ” will appear.

 

 

 

 

 

In Program Unlock mode:

•Oven reverts to a two-touch operating mode (Memory pad + Start pad).

•Repeat and interrupt feature are operational.

•Memory pads can be programmed.

•Tone loudness and length can be changed.

- 11 -