Panasonic NN-CD987W, NN-CD997S To Cook by Auto Menu, Select Menu, Sensor Cook Auto Menu, Press

Models: NN-CD997S NN-CD987W

1 35
Download 35 pages 13.9 Kb
Page 26
Image 26
To Cook by Auto Menu

To Cook by Auto Menu

Sensor Cook (Auto Menu 1 - 9)

This feature allows you to cook most of your favourite foods without having to select cooking times and power levels . The oven does it all automatically .

Operation & Hints

Use of Accessory:

Ceramic Tray

2. Select Menu

Category and “PRESS START” appears in the display window.

3. Press Sensor Cook (Auto Menu 1 - 9)2. Select MenuManual backgroundManual background

After the burst of steam is detected by the SENSOR,

the remaining cooking time appears in the display and begins to

count down .

Do not open the door until the remaining cooking time appears in the display window.

During cooking, the oven will beep and scroll “STIR” or “REARRANGE” ( - 5, 7, 9) or “TURN OVER” or “REARRANGE” (8) to signal that the food needs to be stired or rearranged or turned .

Manual backgroundManual backgroundManual backgroundManual background 1. Press

More/Less pad

Preferences for food doneness vary with each individual . After having used Sensor Cook a few times, you may decide you would prefer your food cooked to a different doneness . By using the More/Less pads, the programs can be adjusted to cook food for a longer or shorter time .

Press More/Less pads after selecting category and before pressing Start pad .

tap = More

2 taps = Less

3 taps = Original setting

For best results, follow these recommendations:

.The Sensor Cook works by detecting the amount of steam generated by the food being cooked . From the generated steam, the oven then calculates the remaining cooking time .

2

.When an Auto Program has been selected, the category will appear in the display window.

3

.The door should not be opened before the time appears in the display window.

4

.When cooking time is longer than 60 minutes, the time will appear in hours and minutes .

5

.Do not use plastic dishes as a secure seal cannot be achieved and inaccurate results may occur.

6

.If the oven has been previously used on CONVECTION, COMBINATION or GRILL, and it is too hot to be

 

used on a Sensor Program, a “HOT” will appear in the display window. The cooling fan will operate to cool

 

the oven rapidly . After the “HOT” disappears, the program may be used . If you are in a hurry, cook food

 

manually i .e . select Micro Power Level and cooking time yourself .

 

-24-

Page 26
Image 26
Panasonic NN-CD987W, NN-CD997S To Cook by Auto Menu, Select Menu, Sensor Cook Auto Menu, Press, Operation & Hints