Panasonic NN-GS597M Sensor Reheat Setting, English, by using Menu/Power/Temp

Sensor Reheat Setting

This feature can cook food without setting power and time, only according to the temperature as your require. The field is -10~90°C. The recommended weight is 200-600g.

English

1. Press once.	2. Set the desired temperature	3. Press once.
	by using Menu/Power/Temp.	After detecting for a period of time,
	dial.	the approximate current temperature
		will appear in the display window.

Notes:

1.The default setting is 70°C when plugging in. From the second time, the default setting will be changed to previous setting if between 55~75°C.

2.After reheating, stir then serve.

3.The food must be put in the center of ceramic plate.

4.For the beverage, the reheat field is 1-4 cups (200ml/cup). After reheating, stir carefully. Arrange the containers as figure.

1 cup 2 cups

oven door

position

3 cups 4 cups

Container

5.The plastic wrap should cover the food tightly, otherwise, the temperature of food may not be tested. If the plastic wrap is overlapped, make sure the overlapped area is placed downwards.

Plastic wrap

Food

6.Food less than 100g can not be detected. It may cause overcook.

7.If the temperature of the cavity is too high, sensor reheat feature can not be used. Display window will appear "HOT". Sensor reheat feature can be used again until the "HOT" disappears.

8.The actual temperature maybe different from the required temperature. It depends on the cavity temperature, the food density, the container, the placement of the food etc.

9.Avoid using straight-sided containers with narrow necks when using Sensor Reheat.

- Eng-16 -

IP1589_38S80KP_Eng_06_071227.indd 16

2007-12-27 Good Tom 15:50:11