6.Confirm after repair
(A)After repair or replacement of parts, make sure that the screws of the oven, etc. are neither loose nor missing.
Microwaves might leak if screws are not properly tightened.
(B)Make sure that all electrical connections are tight before inserting the plug into the wall outlet.
(C)Check for microwave energy leakage. (Refer to procedure for measuring microwave energy leakage.)
CAUTION
MICROWAVE RADIATION
DO NOT BECOME EXPOSED TO RADIATION FROM THE MICROWAVE GENERATOR OR OTHER PARTS CONDUCTING MICROWAVE ENERGY.
IMPORTANT NOTICE | NEW H.V. |
|
1.The following components have potentials above 250V while the appliance is operating..
*Magnetron
*High voltage transformer (Located on Inverter (U))
*High voltage diodes (Located on Inverter (U))
*High voltage capacitors (Located on Inverter (U))
Pay special attention on these portions.
2.When the appliance is operated with the door hinges or magnetron fixed incorrectly, the microwave leakage can reach more than 5mW/cm2. After repair or exchange, it is very important to check if magnetron and the door hinges are correctly fixed.
- 12 -
