Using the Menu Screen
PUSH
W.B/SHUTTER/IRIS/MF/VOL/JOG MENU | FOCUS |
2, 3, 4, 5 | 1 |
1MODE 
ON
OFF
To facilitate the selection of a desired function or setup, this Movie Camera displays various function setups on Menus.
1Press the [MENU] Button.
≥The Menu corresponding to the Mode selected by using the [OFF/ON/ MODE] Switch 1 is displayed.
2Turn the [PUSH] Dial to select a desired
≥Turn the [PUSH] Dial to display the highlightened item.
3Press the [PUSH] Dial to display the selected
4Turn the [PUSH] Dial to select the item to be set.
5Press the [PUSH] Dial to set the selected item to a desired mode.
≥With each press of the [PUSH] Dial, the cursor [1] moves to the next
mode. Menu items that cannot be used in combination with the selected item are displayed in dark blue.
≥While a Menu is displayed, you cannot record or play back. Menus can be displayed during playback but not during recording. The above operations can be done using the [MENU] Button, [SET] Button and [ITEM] Button on the Remote Controller. (l8)
To Exit the Menu Screen
Press the [MENU] Button again.
About the Menu Mode Setting
The setting selected on the Menu will be retained even when the Movie Camera is turned off. However, if the Battery or AC Adaptor is disconnected before turning off the Movie Camera, the selected setup may not be retained. (But, the setups of [EFFECT2] (l25) are not retained.)
≥Menu operation flow is shown in this text by >>.
ªPicture Selection
A Picture Selection Operation may be necessary during Menu Operations. In this case, carry out the following procedure.
1Turn the [PUSH] Dial and select a picture.
|
|
| ≥The selected picture is marked by a frame 2. |
|
| 2 | 2 Press the [PUSH] Dial to confirm the selection of the picture. |
|
| ≥After the above Picture Selectioin Procedure, carry out the various Menu | |
PUSH1,2 | FOCUS | Operations. (The above procedure will not be repeated in the following | |
W.B/SHUTTER/IRIS/MF/VOL/JOG MENU | instructions.) | ||
PICTURE |
| ||
No.25 | IMGA0012.JPG |
|
|
13
