Panasonic NV-FJ604, NV-FJ606, NV-FJ610 manual Setting the VCR’s Clock, To Manually Adjust the Clock

Setting the VCR’s Clock

Usually, the VCR’s Auto Setup function automatically adjusts the clock to the correct time.

Under some reception conditions, however, the VCR cannot set the clock automatically.

In this case, follow the operation steps below to manually set the clock.

To Manually Adjust the Clock

1	Press the MENU button S to display the Main menu on
	the TV screen.
2	Press the Cursor buttons (34)
		Clock setting			VCR
	P to select “Clock setting” then
			:
	press the OK button R.	Automatic		OFF
		Time	: 20:30:24
	≥ The Clock setting menu
		Date	: 16.10.05
	appears on the TV.
3
	Confirm that “Automatic” is set to “OFF”, and then press
	the OK button R.

To Activate the AutomaticTime Correction Function

If a TV station transmits a signal for time setting, performing the operation steps below activates the Automatic time correction function and the time is corrected automatically.

1Press the MENU button S to display the Main menu on the TV screen.

2Press the Cursor buttons (34) P to select “Clock

setting” then press the OK button R.

≥The Clock setting menu

	appears on the TV.	Clock setting			VCR
			:
		Automatic		ON
3	Use the Cursor buttons
		Time	: 20:30:24
	(34) P to set “Automatic”	Date	: 16.10.05
	to “ON”.
4
	Press the OK button R to conclude the setting.
	≥ Under adverse reception conditions, etc., the
	Automatic time correction function may not work. In
	this case, the indication for “Automatic” is
	automatically reset to “OFF”.
	If the reception conditions improve later on, it may be

4Use the Cursor buttons

(3421) P to set the date and time.

≥Instead of the Cursor buttons

(3421) P, you can also use the numeric buttons 2 to set the date and time.

VCR

Clock setting

Automatic	: OFF
Time	:	20:		:24
			30
Date	:	16.10.05

possible to activate this function.

5 Press the EXIT button Q to exit the On Screen Display.

5Press the OK button R to conclude the setting.

6Press the EXIT button Q to exit the On Screen Display.

Hints:
≥ If “Automatic” is set to “ON” when you open the Clock
screen, do not set it to “OFF”, otherwise, the automatic time
correcting function is deactivated.
≥ The built-in clock employs the 24-hour system.
≥ In case of a power failure, an automatic back-up system	Settings
automatically maintains the operation of the clock for at
least 60 minutes.
≥ When “Automatic” on the Clock setting menu is set to “ON”,
the automatic time correction function checks and if
necessary adjusts the time several times every day.
The automatic time correction function only works when	Various
the VCR is switched off; it does not work in the timer
recording standby mode.
≥ If “Automatic” is set to “OFF” and “Power save” to “ON” (see
page 27), the time may not be maintained correctly. In this
case, manually adjust the clock.
≥ If “Automatic” is set to “ON” and “Power save” to “ON”, the
Automatic time correction function does not work while the
VCR is turned off. However, as soon as it is turned on, the
Automatic time correction function is activated and the
clock is set correctly.

25