Search Functions
Jet Navigator
This VCR can display a list of the recorded programmes on the inserted video cassette on the TV screen. You can then select the desired programme, and the VCR will quickly locate its beginning and start playback.
Conditions for correct operation of the Jet Navigator function:
–The tape length of the inserted cassette must be set correctly. (See page 12.)
–The VCR must not be in the timer recording standby mode.
–A programme of at least 15 minutes must be recorded on the tape.
Preparations
–Display the VCR picture on the TV.
–Be sure to set [JET NAVIGATOR] to [ON] (see page 12) and preform recording.
Operations | On Screen Display | |||
| JET NAVIGATOR | |||
1 Press the NAVI button 4 to display |
| |||
DATE CH | ON | CATEGORY | ||
the Jet Navigator list. | 10/18 | 1 | 10:30 | MUSIC |
10/19 | 24 | 15:00 | SPORT | |
– Up to 14 programme data that | 10/21 | 5 | 22:15 |
|
10/23 | A2 | 20:02 |
| |
10/26 | 4 | 19:10 | EDUCA | |
have been recorded last are | 10/27 | 2 | 20:02 |
|
10/27 | 12 | 20:30 |
| |
displayed on the Jet Navigator list. |
|
|
| END : MENU |
|
|
|
| |
|
| |||
(7 programme data for each page) |
|
| ||
–When more than 15 programs have been recorded for one cassette, the programme data are deleted from the first one.
–When pressing NAVI button 4 during playback, playback stops and the Jet Navigator list appears.
To Set the Category
The category setting allows you to find what kind of programmes are recorded by the character and the icon indications.
Press the Cursor button (1) S while | CATEGORY SETTING | ||||
the Jet Navigator list appears. |
| ≥MOVIE |
| ≥SPORT | |
|
| ≥MUSIC |
| ≥CHILD | |
|
| ≥DRAMA |
| ≥NEWS | |
|
| ≥EDUCA |
| ≥OTHER | |
|
| ≥DOCUM |
| ≥– – – – – | |
|
|
|
|
| END : MENU |
|
|
|
|
| |
|
|
|
|
|
|
Category | Indication |
|
| Icon | |
|
|
|
|
|
|
MOVIEMOVIE
MUSICMUSIC
DRAMADRAMA
EDUCATIONEDUCA
DOCUMENTARY DOCUM
SPORTSSPORT
CHILDRENCHILD
NEWSNEWS
OTHERSOTHER
To Delete the Jet Navigator Data of a Single Video Cassette Tape:
Keep the CANCEL button ; pressed for more than 5 seconds while the Jet Navigator list appears.
[–
–See page 12 on the way to delete all the Jet Navigator data stored in the VCR’s memory.
Notes:
–The Jet Navigator list is stored in each cassette.
–Signals approximately 10 seconds before and after the current tape position are checked. (During this checking, [CHECKING JET NAVIGATOR DATA.] is displayed on the TV screen.)
–Checking cannot be performed properly when signals are attempted to be checked at portions of the tape where there are no signals such as at unrecorded portions of the tape. In this case, press the NAVI button 4 at a portion of the tape where a programme has been recorded of this VCR. This will allow signal checking to be performed more reliably. When a signal can still not be found, [CAN NOT FIND JET NAVIGATOR DATA.] is displayed on the TV and you cannot find the beginning of the programme.
–Up to 20 cassettes and 50 programmes can be registered.
–If 50 recorded programmes data is already stored in memory and you attempt to store timer recording data for another programme, the message [REMAINING PROGRAMME 0. DELETE JET NAVIGATOR DATA.] appears. If you attempt to make a new recording, this same message also appears after you insert the cassette and the Jet Navigator data is checked. As each timer recording or manual recording is finished, the programme data is deleted, starting from the oldest data.
–When a new programme is attempted to be recorded if programmes equivalent to 20 cassettes are already stored in memory, [REMAINING CASSETTE 0. FOR JET NAVIGATOR.] is displayed. Programmes recorded without deleting data as instructed are not registered in the list.
20
