Menu
Menus related to taking pictures
ª[H.SHOE MIC]
Set to [LOWCUT] and this reduces low sound noise and wind noise hitting the stereo zoom microphone
ª[DATE/TIME]
This switches between date and time indications. ≥The movie camera automatically records the
date and time of picture taking on the tape. ≥You can also show or change the date/time
indication by repeatedly pressing the [DATE/TIME] button on the remote control.
ª[AUDIO REC]
Switches the audio (PCM audio) recording systems.
[12bit]: Records audio in “12 bit 32 kHz 4 tracks”. (The original audio signals can be kept after the other audio signals are dubbed.)
[16bit]: Records audio in “16 bit 48 kHz 2 tracks”. Audio can be recorded in higher quality. (If audio signals are dubbed, then the original audio signals will be erased.)
ª[REC LAMP]
Set to [ON] and this turns the recording lamp on during recording, which indicates that recording is underway. Set to [OFF] and this does not turn on the lamp even when recording is underway.
ª[DISPLAY]
Set to [ON] and the display mode can be switched to all functions. Set to [OFF] and it can be switched to minimum display.
ª[BEEP SOUND]
Set to [ON] and confirmation/alarm beeps are issued as follows.
1 Beep
≥When you start recording ≥When you turn on the power 2 Beeps
≥When you pause recording 2 Beeps for 4 times
≥When a cassette with its erasure prevention tab set to [SAVE] is inserted, condensation occurs, and at other times. Check the sentence displayed on the screen.
ª[POWER SAVE]
[OFF]: | When about 5 minutes passed |
| without any operation, the standby |
| mode automatically will be set. In |
| the standby mode, [;] blinks and it |
| takes time more than usual to start |
| recording after you press the |
| recording start/stop button. |
44
[5 MINUTES]:When about 5 minutes passed without any operation, the movie camera automatically turns off to protect the tape or to prevent the battery from running down. When you use the movie camera, turn it on again.
≥In the following cases, the power may not turn off even when set
[POWER SAVE] >> [5 MINUTES]. ≥When connecting to the AC outlet
(When using the AC adapter)
≥When connecting the USB cable or the DV cable to a personal computer or other equipment
≥When the PC mode
Menus related to playback
ª[AV JACK]
This switches among the output settings of the AV/headphone terminal.
[OUT/Ë]: Automatically switches between AV and headphone output.
[OUT]: Use this setting when image or sound is not output normally to the TV in [OUT/Ë].
≥When using the headphone, set to [SETUP] or [BASIC] >> [AV JACK] >> [OUT/Ë]. If set to [OUT], you may hear noises on the right.
ª[REC DATA]
Set to [ON] and the settings (shutter speed, iris/ gain values, and white balance settings
≥When the [AUTO/MANUAL/FOCUS] switch is set to [AUTO], the indication [AUTO] will appear.
≥When there is no data,
≥If the camera data of the movie camera are played back on other equipment, the settings information is sometimes not displayed normally.
ª[AUDIO OUT]
This switches the sound to be played back. [STEREO]: Stereo sound (main sound and sub
| sound) |
[L]: | Left channel sound (main sound) |
[R]: | Right channel sound (sub sound) |
VQT0N50
