Before using
Fitting the lens cap (optional)
Fit the lens cap to protect the surface of the lens. If you do not use the movie camera when the MC protector or the ND filter of the Filter Kit
1Remove the grip belt. Run the end of the lens cap cord through the hole in the grip belt attachment part and run the lens cap through the lens cap cord.
≥The lens cap removed can be hung on the lens cap fixture. (It cannot be hung if the grip belt is used as a hand strap.)
≥To fit or remove the lens cap, hold both sides of the lens cap with the tips of your first 2 fingers.
The one-touch free-style grip belt
ªTo use as a hand strap
If you use the grip belt as a hand strap, then you can carry or handle this camera more easily.
1Open the lock cover 1 by pinching the projections 2 on both sides. Press the lock button 3 to remove the grip belt.
2
13
≥When removing the grip belt, tightly hold the camera with both hands.
≥After removing the grip belt, restore the lock
cover to the original position.
2Adjust the belt length.
1 2
1 3
1Flip the belt.
2Slide 1 in the direction indicated by the arrow.
3 Fix the belt.
3 Put your hand through the strap.
≥Use the free style remote control with mic for more convenience.
≥Hold the movie camera not to cover the microphones or the sensors with your hands.
ªTo restore the strap to the grip belt
≥When returning the grip belt to the grip belt attachment part, press the lock cover 1 and check if the grip belt is securely locked.
1
7
VQT0N50
