Record mode

If you record a subject illuminated with strong light or a highly reflective subject, vertical lines of light may appear.

If the brightness is insufficient, the sports mode does not function. The [5] indication flashes.

If this mode is used indoors, the screen may flicker.

Portrait mode

If this mode is used indoors, the screen may flicker. If so, change the scene mode setting

to [OFF].

Low light mode

Extremely dark scenes may not be able to be recorded finely.

Spotlight mode

If the recording subject is extremely bright, the recorded image may become whitish and the periphery of the recorded image extremely dark.

Surf & snow mode

If the recording subject is extremely bright, the recorded image may become whitish.

Recording in natural colours (White balance)

The automatic white balance function may not reproduce natural colours depending on the scenes or lighting conditions. If so, you can adjust the white balance manually.

Set to Tape/Card Recording Mode.

1Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL].

AUTO

MANUAL

FOCUS

2Move the joystick down until the white balance indication appears. ([ AWB ] etc.)

MNL

AWB

3Move the joystick left or right in order to select the white balance mode.

1)

1 AWB

2)

1

3)

1

4)

1

30

1)Auto white balance adjustment [ AWB ]

2)Indoor mode (for recording under incandescent lamps) [ ]

3)Outdoor mode [ ]

4)Manual adjustment mode [ ]

ªTo restore to the automatic

adjustment

Move the joystick left or right until the [ AWB ] indication appears. Or, set the [AUTO/MANUAL/ FOCUS] switch to [AUTO].

When the camera is turned on with the lens cover closed, the automatic white balance adjustment may not function properly. Please turn the camera on after opening the lens cover.

When setting both the white balance and the iris/gain, set the white balance first.

Whenever recording conditions change, re-set the white balance for correct adjustment.

ªTo set the white balance manually

Select [ ] in Step 3. Then, while viewing a white subject on the entire screen, move the joystick up to select the [ ] indication.

ªAbout flashing of the [ ] indication

When the manual adjustment mode is selected

Flashing indicates that the white balance previously adjusted is stored. This setting is stored until the white balance is adjusted again.

When white balance cannot be set in the manual adjustment mode

White balance may not be adjusted properly in the manual adjustment mode in dark places. If so, use the auto white balance mode.

During setting in the manual adjustment mode

When the setting is completed, it will keep lit.

ªAbout the white balance sensor

The white balance sensor detects the type of light source during recording.

Do not cover the white balance sensor during recording, or it may not function properly.

ªAbout the black balance adjustment

This is one of the 3CCD system functions that automatically adjusts the black when the white balance is set in the manual adjustment mode. When the black balance is adjusted, the screen will temporarily be black.

1 2 3

1Black balance adjustment (Flashes.)

2 White balance adjustment (Flashes.)

3 Adjustment completed (Lights up.)

VQT0N50

Page 30
Image 30
Panasonic NV-GS150GN operating instructions Recording in natural colours White balance