Before using
1
(42)
(42)Lens hood
2
(40)
(40)Tripod receptacle
This is a hole for attaching the camera to optional
≥When the tripod is used, operate the camera from the free style remote control with mic for convenience. (When not using the remote control, attach the clip to the grip belt for convenience. When you move with remote control attached to a pocket, etc., take care to avoid falling of the tripod.)
≥You cannot open the card slot cover when the tripod is used. Insert the card first and then attach the tripod.
(41)
(41)Shoulder strap fixture
1
3
2
≥Put the strap through the fixture 1 and through the stopper 2 so it will not come off. Extend part 3 by at least 2 cm.
≥Fit the other end of the belt similarly.
6
In order to remove the lens hood, rotate it counterclockwise 1. In order to fit it, put into slot 2, and then rotate it clockwise.
≥Fit the MC protector or the ND filter of the Filter Kit
hood.
≥When fitting the tele conversion lens
≥When 2 lens accessories, such as the ND filter and tele conversion lens, are fitted and the [W/T] lever is pressed toward the [W] side, the 4 corners of an image will be darkened. (Vignetting)
≥The lens hood has a
VQT0N50
