Panasonic NV-GS300 operating instructions Using the DV Cable for Recording Digital Dubbing

Edit mode

≥For more information, refer to the operating instructions for your TV set and recorder.

≥When you do not need functional indications or date and time indication, set [BASIC] >> [DATE/TIME] >> [OFF] in the Tape Playback Mode and press the [EXT DISPLAY] button on the remote control for no indication.

(When you connect the movie camera and a recorder with the DV cable, these indications may not appear.)

ªWhen neither image nor sound from the movie camera is output to the TV

set

≥Check that the plugs are inserted as far as they go.

≥Check the [12bit AUDIO] settings. (-48-) ≥Check the connected terminal.

Using the DV Cable for Recording (Digital Dubbing)

By connecting other digital video equipment with DV terminal and the movie camera by using the DV cable VW-CD1E (optional) 1, high-image- quality dubbing can be done in digital format. ≥Set to Tape Playback Mode.

(Player/recorder)

1Connect the movie camera and digital video equipment with the DV cable.

1

2Set [ADVANCED] >> [REC STDBY] >> [YES].

(Recorder)

≥You do not have to follow this step when the remote control is used in the digital dubbing.

3Start playback. (Player)

4Start recording. (Recorder)

When operating with the main unit: Move the joystick up to select [¥/;] icon.

When operating with the remote control:

While pressing the [¥REC] button on the remote control, press the [PLAY 1] button.

5Move the joystick up to select the [¥/;] icon again or press the [;] button on the remote control to stop recording. (Recorder)

6Stop playback. (Player)

ªTo cancel the standby for recording

When the camera is standby for recording, move the joystick down and select the [∫] icon or press the [∫] button on the remote control.

≥Do not plug or unplug the DV cable during dubbing, or the dubbing may not be completed properly.

≥If a picture (bilingual video, etc.) containing main sound and sub sound has been dubbed, select the desired sound by [SETUP] >> [AUDIO OUT] on playback.

≥Even if you use a device equipped with DV terminals such as IEEE1394, you may not be able to perform digital dubbing in some cases. For more information, see the instructions for equipment connected.

≥Regardless of the menu settings on the recorder, digital dubbing is carried out in the same mode as the [AUDIO REC] mode of the playback tape.

≥The images on the recorder monitor may be disturbed, but it does not affect the recorded images.

47

VQT0T29