Record mode
34
VQT0T29
Self-timer recording
You can record still pictures on a card using the
timer.
Set to Card Recording Mode.
1Press the joystick to display the icon. Move
the joystick down until icon 1 appears.
2Move the joystick left to select the self-timer
recording icon [ ].
The [SELF-TIMER ON] indication appears on
the screen of the movie camera.
3Press the [PHOTO SHOT] button.
After the recording lamp and the [ ]
indication flashes for approx. 10 seconds,
recording will start. After recording, the
self-timer will be cancelled.
If you press the [PHOTO SHOT] button
halfway and then fully, the subject is focused
when the button is pressed halfway.
When you press the [PHOTO SHOT] button
fully, the subject is focused just before
recording.
ªTo stop the timer midway through
Press the [MENU] button.
The self-timer standby mode is cancelled when
you turn off the power or operate the mode dial.
If the continuous photoshot recording is set, the
maximum recordable pictures are recorded.
Wide/4:3 Function
This allows you to record images compatible with
wide-screen TVs.
Wide Function
Images are recorded with a 16:9 aspect ratio.
4:3 Function
Images are recorded with a 4:3 aspect ratio.
Set to Tape/Card Recording Mode.
1Wide Function
Set [BASIC] >> [REC ASPECT] >> [16:9].
4:3 Function
Set [BASIC] >> [RECASPECT] >> [4:3].
ªTo Cancel the Wide/4:3 Function
Wide Function
Set [BASIC] >> [RECASPECT] >> [4:3].
4:3 Function
Set [BASIC] >> [RECASPECT] >> [16:9].
The default setting is [16:9].
In the wide-screen mode, the menu screens,
operation icons and other screen displays
appear horizontally oriented.
When images are played back on a TV screen,
the date/time indication may be erased in some
cases.
Depending on the TV, the picture quality may
deteriorate.
If still pictures recorded with a 4:3 aspect ratio
are played back when [TV ASPECT] is set to
[16:9], part of the operation icons and other
displays will appear on the black bands on the
left and right of the picture.
Concerning the TV to be connected and TV
used for playback
When playing back images taken by this unit
on a TV screen, change the setting
established by Tape/Card playback mode
[SETUP] >> [TV ASPECT] to match the
aspect ratio (4:3 or 16:9) of the TV monitor to
be connected. (-42-)
Depending on the settings of the TV
connected, the images may not be displayed
properly. For more information, please read
the operating instructions for the TV.
1
PHOTO SHOT
VQT0T29_ENG.book 34 ページ 2005年11月22日 火曜日 午後11時5分