Record mode
Fade in/fade out function
Fade in
The image and audio gradually appear.
Fade out
The image and audio gradually disappear. ≥Set to Tape Recording Mode.
1Press the joystick until the icon 1 appears.
2Move the joystick left to select the fade icon [
].
1
B
3Press the recording start/stop button. Start recording. (fade in)
When you start recording, the image/audio disappeared completely and the image/audio gradually appears.
Pause recording. (fade out)
The image/audio gradually disappears. After the image/audio completely disappears, recording stops.
ªTo cancel fading
Select the [
] icon again.
ªTo select the colour for fade in/out
The colour which appears in fading pictures can be selected.
1 Set [SETUP] >> [FADE COLOUR] >> [WHITE] or [BLACK].
≥While the fade in/fade out function is selected, it takes several seconds to display the image when you start recording images. Besides, it also takes several seconds to pause recording.
Wind noise reduction function
This reduces the wind noise coming into the microphone when recording.
≥Set to Tape Recording Mode.
1Set [BASIC] >> [WIND CUT] >> [ON].
ªTo cancel the wind noise reduction
function
Set [BASIC] >> [WIND CUT] >> [OFF].
≥Reduces the wind noise depending on the wind strength. (If this function is activated in strong winds, the stereo effect may be reduced. When the wind weakens, the stereo effect will be restored.)
Self-timer recording
You can record still pictures on a card using the timer.
≥Set to Card Recording Mode.
1Set [BASIC] >> [SELF TIMER] >> [YES].
2Press the [PHOTO SHOT] button.
PHOTO
SHOT
≥After the [
] indication flashes for approx. 10 seconds, recording will start. After recording, the
ªTo stop the timer midway through
Press the [MENU] button.
≥By operating the [OFF/ON] switch or mode dial, the
≥If the continuous photoshot recording is set, the maximum recordable pictures are recorded.
24
LSQT0893
