Before Use
Setting Date and Time
Since the internal clock of the Movie Camera has a slight imprecision, make sure to check the time before recording.
STILL
s 
ENTER 
i
FADE
(18) MENU
1 Set [INITIAL] >> [CLOCK SET] >> [YES].
CLOCK SET
1YEAR 2004
MONTH 10
DAY 8
HOUR 14
MIN. 30
;/∫:SELECT &/%:SETUP !/MENU:EXIT
2Press the [;/∫] Button to select [YEAR], [MONTH], [DAY], [HOUR] or [MIN.] and press the [6/5] Button to set it to the desired value.
≥Year will cycle in the order shown below. 2000, 2001, ..., 2089, 2000, ...
3Press the [MENU] Button (18) to finish setting the date and time.
≥The clock operation starts from [00] second.
≥If the
≥The clock uses the
Internal Lithium Battery Recharge
The internal lithium battery sustains the operation of the clock. When the [0] Indication flashes, the internal lithium battery is near exhaustion.
1Connect the AC Adaptor to the Movie Camera with the power turned off and then connect to the AC Mains socket.
≥After charging for 4 hours, the
LP Mode
A desired recording speed can be selected with [REC SPEED] on the [RECORDING]
If LP Mode is selected, the recording time becomes 1.5 times longer than that of SP Mode.
Although the image quality does not decrease with the LP Mode recording,
≥The contents that are recorded in LP Mode are not completely compatible with other equipment.
≥Audio dubbing is not possible with LP Mode.
Audio Recording Mode
The sound quality of the recorded sound can be selected with [AUDIO REC] on the [RECORDING]
High
32 kHz 4 track” Mode, the original sound can be recorded on 2 tracks in stereo, while the other 2 tracks can be used for Audio Dubbing.
