Playback Mode

-82-

Playback Mode

Playing Back a Tape

The recorded scene can be played back
immediately after the recording.
1Set the [OFF/ON] Switch (46) to [ON].
The [POWER] Lamp (47) lights up.
2Set the Mode Dial (43) to Tape Playback
Mode.
3Press the [6] Button (16) to rewind the
tape.
Rewind the tape to the point where you want
to start playback.
When the tape reaches the beginning,
rewinding stops automatically.
4Press the [1] Button (14) to start playback.
The [!] Indication appears.
If a cassette recorded with a copyright
protection signal is played back, the picture is
distorted by mosaic-like patterns.
To Stop Playback
Press the [] Button (15).

ªAdjusting the Sound Volume

To adjust the volume, push the [W/T] Lever (40)
to display the [VOLUME] Indication. Push the
ON
OFF
(46)
(47)
PC
S
D
(43)
STILL
ENTER
FADE
is
(16)
STILL
ENTER
FADE
is
(14)
(15)
STILL
ENTER
FADE
is
[W/T] Lever towards [T] to increase the volume or
push the [W/T] Lever towards [W] to decrease the
volume. The [VOLUME] Indication goes off after
the adjustment is finished.
To adjust the volume with the Remote Controller,
press the [T] or [W] Button to display the
[VOLUME] Indication. Pres s the [T] Button to
increase the volume or press the [W] Button to
decrease the volume. The [VOLUME] Indication
goes off after the adjustment is finished.
The sound volume cannot be adjusted using the
Remote Controller in Playback Zoom Mode.
(-84-)
For other notes concerning this item, see -102-.

Finding a Scene You Want to Play

Back

ªCue/Review Playback

If the [5] Button (13) or [6] Button (16) is
pressed during Playback, it turns to Cue Playback
A or Review Playback B.
If the Button is held continuously, it turns to Cue
Playback or Review Playback until you release
it.

ªVariable Speed Search Function

The speed of Cue Playback or Review Playback
can be varied.
1During playback, press the [1] Button (14).
VOL/JOG
WT
(40)
STILL
ENTER
FADE
is
(16) (13)
AB
55GC-ENG.book 82 ページ 2004年2月25日 水曜日 午後2時21分