Others
-97-
[F] means Fine, [N] means
Normal and [E] means Economy.
-71-
, , , : MPEG4 Picture Quality -72-
0: Remaining Number of Photoshot
pictures
R:0h00m: Remaining time of MPEG4
: Continuous Photoshot Recording
-72-
: Lock Setting -88-
¥ (White): DPOF Setting completed (set to
1 or more picture) -88-
: [640k480] Image size
≥For images not recorded with this Movie
Camera, the size display is determined as
follows according to the number of horizontal
pixels.
: 640 or more, less than 800 (The
size is not displayed at under
640 pixels.)
: 800 or more, less than 1024
: 1024or more, less than 1280
: 1280 or more, less than 1600
: 1600 or more, less than 2048
: 2048 or more
(Cyan): Photoshot Mode
(Red): While Photoshot recording is
activated
(Green): While the card is
being read
(Red): No Card (Still Picture Mode)
(Cyan): Moving Picture (MPEG 4)
Recording Mode
(Red): While Moving Picture (MPEG4)
recording is activated
ªTo Change the Counter Display Mode
By changing [C.DISPLAY] on the [DISPLAY]
Sub-Menu, you can change the Counter Display
Mode to Tape Counter Indication [COUNTER]
(0:00.00), Memory Counter Indication [MEMORY]
(M0:00.00), and Time Code Indication
[TIMECODE] (0h00m00s00f). (-66-) By repeatedly
pressing the [DISPLAY] Button on the Remote
Controller, you can change the Counter Display
Mode.
ªTo Display Date/Time Indication
To display Date/Time Indication, set the
appropriate Date/Time in [DATE/TIME] on the
[DISPLAY] Sub-Menu. (-66-)
You can also press the [DATE/TIME] Button of
the Remote Controller repeatedly to display or
change the Date/Time Indication.
ªTo Change the Display Mode
By changing [DISPLAY] on the [DISPLAY]
Sub-Menu, you can change the Display Mode to
E N F SF
640
640
SVGA
XGA
SXGA
UXGA
QXGA
PICTURE
PICTURE
PICTURE
PICTURE
MPEG
4
MPEG
4
All Function Display [ALL] and Minimum Display
[OFF]. (-66-)
ªProgressive Photoshot
You cannot use the Progressive Photoshot
Function in the following cases.
When using Tape Recording Mode
≥Digital Effect Modes in [EFFECT1]
≥Digital Zoom [D.ZOOM]
≥1/750 s or faster shutter speed
≥When brightness is insufficient
≥When the Night View Function is ON
≥When the Portrait Mode is used
When using Card Recording Mo de
≥When brightness is insufficient
≥When the Night View Function is ON
Initializing the ModesYou can change the Menu settings back to the
shipping condition.
1Set [INITIAL] >> [INITIAL SET] >> [YES].
≥The initializing takes a little while.
≥After the initializing is completed, the
[COMPLETED] Indication appears with
beeps.
≥Initializing will not erase the clock setting (-69-)
that has been adjusted.
Warning/Alarm IndicationsIf any one of the following indications lights up or
flashes, please check the condition of the Movie
Camera.
3DEW (DEW DETECT/EJECT TAPE):
Condensation has occurred. -105-
Y (CHECK REC TAB/TAPE NOT INSERTED):
You are attempting to record pictures on a
Tape with setting the accidental erasure
prevention slider to [SAVE].
You are attempting Audio dubbing or Digital
dubbing on a Tape with setting the
accidental erasure previntion slider to
[SAVE].
No Cassette is inserted. -62-
6 (LOW BATTERY):
The Battery is low. Recharge it. -60-
0: The built-in battery is low. -69-
: (NEED HEAD CLEANING):
The video heads are dirty. -106-
2END (TAPE END):
The tape came to the end during recording.
REMOTE (CHECK REMOTE MODE):
Wrong Remote Controller Mode has been
selected. -60-
UNPLAYABLE TAPE
(OTHER FORMAT):
You are attempting to play back a tape
55GC-ENG.book 97 ページ 2004年2月25日 水曜日 午後2時21分