
Record mode
Wind noise reduction function
This reduces the wind noise coming into the microphone when recording.
≥Set to Tape Recording Mode.
1Set [BASIC] >> [WIND CUT] >> [ON].
ªTo cancel the wind noise reduction
function
Set [BASIC] >> [WIND CUT] >> [OFF].
≥Reduces the wind noise depending on the wind strength. (If this function is activated in strong winds, the stereo effect may be reduced. When the wind weakens, the stereo effect will be restored.)
Self-timer recording
You can record still pictures on a card using the timer.
≥Set to Card Recording Mode.
1Set [BASIC] >> [SELF TIMER] >> [YES].
2Press the [PHOTO SHOT] button.
PHOTO
SHOT
≥After the recording lamp and the [ ] indication flashes for approx. 10 seconds, recording will start. After recording, the
ªTo stop the timer midway through
Press the [MENU] button.
≥By operating the [OFF/ON] switch or mode dial, the
≥If the continuous photoshot recording is set, the maximum recordable pictures are recorded.
Recording images for wide-screen TVs
This allows you to record images compatible with
Cinema Function
Images are recorded with a black belt appearing along the top and bottom of the screen so that they look like theatre movies.
≥Set to Tape Recording Mode.
1Set [ADVANCE] >>[CINEMA] >> [ON].
CINEMA
ªTo cancel the Cinema function
Set [ADVANCE] >>[CINEMA] >> [OFF].
≥Images played back vary depending on the TV connected. Please refer to the operating instructions for your TV.
≥This function does not widen the recording range.
≥When images are played back on a TV screen, the date/time indication may be erased in some cases.
≥Depending on the TV, the picture quality may deteriorate.
≥When a cinema picture is imported into a personal computer, the imported picture may not be displayed correctly, depending on the software in used.
25
VQT0N61