Classification REV | Panasonic PAN4570 specs

The DOS entry window displays the progress of programming and finally displays >SUCCESS<. If not check again steps 3. to 5.

7.Remove the connection of the Insight Adaptor to the PAN4570 carrierboard. Plug the PAN4570 carrierboard to the testboard and push RESET on the

testboard

PAN4570 is now ready to run the programmed software. For the em250- rangetest see part 9.3.

European Technology Center

Panasonic Electronic Devices (EUROPE) GmbH

APPROVED

genehmigt

CHECKED

geprüft

DESIGNED

Erstellt

Image 13

Contents

Manual Evaluation-Board for PAN4570 Wireless Module Table of Contents Overview Contents of the Evaluation KITHardware Needed Software Needed Setting UP the Evalboard Testboard Layout Input buttons Output LEDs PAN4570 SMA socket Operation of the Testboard Power Supply D.C. Power from a Power SupplyJP2 JP3 Power on D.C. Power from a USB Device Serial Port Reset Begin upload CCCCCC… Upload of Emberznet Sample Applications LED Gpio Selecting the Hardware Platform Ember Zigbee Implementation Flash Programming of PAN4570 Embertm Insight Adaptor Configuration For details on using the em2xxload.exe utility see also Classification REV Development of Applications Reset Rstb Sifclk Sifmiso Sifmosi SifloadbVbat GPIO4 GPIO5 Channel Testing for IEEE802.15.4 Parameters Sheet Schematic of the ISM RF Transceiver Testboard Sheet PAN4570 Carrierboard Document Status Related DocumentsHistory for this Document Life Support Policy General Information

CLASSIFICATION