CLASSIFICATION |
|
| No. |
|
| REV. |
Einstufung |
|
|
| C | ||
SUBJECT | EvalBoard PAN4570 | PAGE |
|
|
| |
Thema |
|
| Seite | 15 of 20 |
| |
CUSTOMER’S CODE |
| PANASONIC’S CODE | DATE | 06.11.2006 | ||
EvalPAN4570 |
|
| Datum | |||
For more information on the items above see the website of EmberTM Inc. (www.ember.com) and the documentation included in the EmberTM Insight Desktop package as part of the EmberTM development kits.
9.4. TESTING FOR IEEE802.15.4 PARAMETERS
The software on PAN4570 as delivered is the >EmberTM Range Test Application 2.0< (Version 1. Oct. 2006) utility. It allows the basic RF transceiver testing including range testing.
The basic operation of EmberTM Range Test Application is as follows. Typing HELP and >return< on the terminal will display a complete list of commands, below the mostly used commands are explained.
e | exit, leaving the last funktion |
channel x | channel entry, where |
| x=b sets the lowest channel at 2405MHz |
| x=12 sets a channel at 2440MHz |
| x=1a sets the highest channel at 2480MHz |
txtone | turns on an unmodulated carrier |
txstream | turns on a continuously modulated carrier |
transmit x | transmission of packets according to IEEE802.15.4 |
receive | reception of packets (requires another device set to transmit on the same |
| channel) |
| remark: for resetting the packet error counter to zero the transmitter has to |
| be restarted |
txpow | after RESET the maximum default Tx power of +3dBm is set. |
| with |
Txpowermode 1 0 | the BOOST MODE with Tx higher output power and higher |
| Rx sensitivity is enabled. BOOST MODE is only allowed |
| for PAN4570 versions with pad or U.FL RF terminal. |
| Hardware RESET or Txpowermode 0 0 returns the module |
| to NORMAL MODE |
All available commands are shown after typing HELP >return<., or as document on the CD.
European Technology Center
Panasonic Electronic Devices (EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
Erstellt
