Troubleshooting
∫It is not a malfunction in following cases
Object seems to be | ≥ Object seems to be warped slightly when the object |
warped. | moves across the image very fast, but this is because the |
| unit is using MOS for the image sensor. This is not a |
| malfunction. |
|
|
When the flash is fired | ≥ With a MOS image sensor, the shooting timing differs |
during shooting, only | slightly between the top left and bottom right of the |
the top or bottom of the | screen. This means that when the flash is fired, the |
screen becomes lighter. | bottom of the screen will become lighter in the field |
| concerned and the top will become lighter in the next |
| field. |
| This is normal and not indicative of any problem. |
|
|
| Power |
Problem | Check points |
This unit cannot be | ≥ When the status display lamp is off, power is not supplied |
turned on. | or the unit is turned off. |
| jCorrectly connect the AC adapter, the AC cable, and |
| the USB cable. |
| jPress the power button of the unit. |
| ≥ When using the wireless remote controller, select the unit |
| by pressing one of the CAM1 to CAM4 buttons, and then |
| press and hold the ON/STANDBY button for 2 seconds. |
| ≥ If you turn off the unit with the power button of the unit, |
| the unit cannot be turned on by the web setting screen, |
| the wireless remote controller or controller. Press the |
| power button to turn on the unit. |
|
|
- 45 -