[Subnet mask]
Input the unit’s subnet mask here if the DHCP function is not used.
≥This function’s default setting is [255.255.255.0].
[Default gateway]
Input the unit’s default gateway here if the DHCP function is not used.
≥This function’s default setting is [192.168.0.1].
≥Multiple IP addresses cannot be used for the default gateway even when the DHCP function is used.
For details on the DHCP server settings, consult your network administrator.
[DNS][Auto]/[Manual]
[Auto]: The DNS server address is to be acquired automatically.
[Manual]: The DNS server address is to be acquired manually.
≥If [Manual] is selected, the DNS settings must be established.
≥If [Auto] is selected when the DHCP function is going to be used, the DNS server address is acquired automatically. For further details, consult your system administrator.
[Primary server address/Secondary server address]
Input the IP address of the DNS server if the [Manual] setting has been selected for [DNS]. For details on the IP address of the DNS server, consult your system administrator.
[HTTP port]
The port number is allocated here separately. (1 to 65535)
≥The following port numbers are used by the unit therefore cannot be used.
20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 554, 995, 10669, 10670, 59000 to 59999, 60000 to 61000
- 40 -